8 axis plasma cutting machine

Price range: USD 45,000 – 80,000 (depending on configuration · FOB Qingdao)

8-axis plasma profile cutter for tubes up to Ø800/□600 mm, channels, angles and H/I-beams, bevels up to ±60°, plasma 30 mm, flame 100 mm. USD 45,000–80,000.

  • CE / ISO 9001
  • 24-month warranty
  • FOB Qingdao
  • Remote & on-site support

8-Axis Profile Plasma Cutter: Overview

The PCL 8-axis profile cutter cuts and bevels tubes and structural sections on one machine: round and square tubes, rectangular tubes, channels (U-beams), angles and H- or I-beams. Eight synchronized axes let it cut bevels on both flange and web of irregular sections.

USD 45,000–80,000FOB Qingdao
Ø800 / □600 mmmax round / square tube
±60°bevel angle compensation
8 axessynchronized motion

8-Axis Profile Cutting in Action

Cutting and bevelling structural sections.

Technical Specifications

8-axis profile plasma – standard data
ProfilesRound, square and rectangular tubes; channel (U-beam); angle; H- and I-beams
Tube capacityRound up to Ø800 mm, square up to 600 mm
BevelUp to ±60° with spatial angle compensation
TorchesPlasma up to 30 mm; flame up to 100 mm
Length6 m or 12 m
PriceUSD 45,000–80,000 FOB Qingdao, depending on configuration
CertificationCE, ISO 9001
Warranty24 months on the whole machine (consumables excluded)

What It Replaces

Structural sections usually pass a saw, a drill line and manual torch work for copes and bevels. The 8-axis cutter does end cuts, copes, holes and bevels on tubes and beams from the program, so parts fit at assembly and weld preparation is consistent. Cut-edge quality is commonly specified with ISO 9013 (perpendicularity and roughness classes). If your drawings call for a class, tell us and we check it on sample cuts.

For accurate bolt holes on H-beams and thinner sections, also compare the HF30120 H-beam laser line.

Where It Sits in the PCL Plasma Range

MachineBuilt forPrice (FOB Qingdao)
Portable plasma cutterHand or guided cutting, 12–25 mmUSD 1,200
P3015 desk plasmaSheet and plate on a compact integrated tableUSD 2,000–15,000
Gantry plasmaLarge plates; plasma and optional flameUSD 2,000–15,000
5-axis bevel plasmaV, X, Y and K weld-prep bevelsUSD 35,000–60,000
Pipe plasmaRound pipe Ø50–1500 mm, saddle cutsOn request
8-axis profile plasma (this machine)Tubes, channels, H- and I-beams with bevelsUSD 45,000–80,000

8-Axis Profile Plasma FAQ

Which profiles can the 8-axis machine cut?

Round, square and rectangular tubes, channels, angles and H- or I-beams.

How large can tubes be?

Round tubes up to Ø800 mm and square tubes up to 600 mm.

How thick can it cut?

Up to 30 mm with plasma and up to 100 mm with the flame torch.

How much does it cost?

USD 45,000–80,000 FOB Qingdao, depending on length and options.

Compare all plasma cutting machines side by side in our selection guide.

Send your section list. We confirm the range and quote the 8-axis line.

Get a quote

Global Delivery & Logistics

From our factory to your workshop: secure packing, careful handling and reliable international shipping, followed by installation support and warranty service.

Export packing of a CNC machine
1Export packingEach machine is cleaned, rust-protected, wrapped and fixed in export packaging built for the sea voyage.
CNC machine loaded and secured in a shipping container
2Container loadingMachines are loaded, braced and secured in the container, and checked against the packing list before sealing.
Container ship for international delivery
3Ocean shippingShipped from Qingdao or other Chinese ports on request. Prices are usually quoted FOB Qingdao; shipping documents travel with the cargo.
4Installation & support
  • Installation guidance and operator training
  • On-site installation available on request
  • 24-month warranty on the whole machine
  • Remote technical support by video and phone