Gantry Plasma Cutting Machine: Overview
The PCL gantry plasma cutter is built for large plates. A dual-drive, heat-treated box-beam gantry runs on high-precision linear guides over the full table, and it can carry a plasma torch and an optional flame torch, covering plates from 1 mm to more than 200 mm.
Gantry Plasma in Action
The gantry cutting large plate.
Technical Specifications
| Structure | Dual-drive gantry, heat-treated box beam |
|---|---|
| Guides | High-precision linear guides |
| Torches | Plasma; optional oxy-fuel (flame) torch |
| Plate thickness | From 1 mm up to 200 mm+ (flame for heavy plate) |
| Plasma sources | Air or industrial plasma, chosen for your thickness |
| Table size | Configured to your plate sizes |
| Price | USD 2,000–15,000 FOB Qingdao, depending on configuration |
| Certification | CE, ISO 9001 |
| Warranty | 24 months on the whole machine (consumables excluded) |
Plasma or Flame
| Torch | Use | Notes |
|---|---|---|
| Plasma | Thin to medium plate | Fast cutting; works on carbon steel, stainless and aluminium |
| Flame (oxy-fuel) | Heavy carbon steel plate | Low torch cost for very thick plate; carbon steel only |
Cut-edge quality is commonly specified with ISO 9013 (perpendicularity and roughness classes). If your drawings call for a class, tell us and we check it on sample cuts.
Where It Sits in the PCL Plasma Range
| Machine | Built for | Price (FOB Qingdao) |
|---|---|---|
| Portable plasma cutter | Hand or guided cutting, 12–25 mm | USD 1,200 |
| P3015 desk plasma | Sheet and plate on a compact integrated table | USD 2,000–15,000 |
| Gantry plasma (this machine) | Large plates; plasma and optional flame | USD 2,000–15,000 |
| 5-axis bevel plasma | V, X, Y and K weld-prep bevels | USD 35,000–60,000 |
| Pipe plasma | Round pipe Ø50–1500 mm, saddle cuts | On request |
| 8-axis profile plasma | Tubes, channels, H- and I-beams with bevels | USD 45,000–80,000 |
Gantry Plasma FAQ
How thick can the gantry machine cut?
From 1 mm with plasma up to more than 200 mm with the optional flame torch on carbon steel.
What table sizes are available?
The gantry and table are built to your plate sizes.
How much does it cost?
USD 2,000–15,000 FOB Qingdao, depending on table size, plasma source and options.
Which plasma source should I choose?
Tell us your daily and maximum thickness; we match an air or industrial source.
Compare all plasma cutting machines side by side in our selection guide.
Send your plate sizes and thickness range. We size the gantry and torch set-up.
Get a quote










