P3015 plasma cutting machine

Price range: USD 2,000 – 15,000 (depending on configuration · FOB Qingdao)

Desk-type CNC plasma cutter with factory-calibrated integrated bed, ±0.05 mm positioning, helical racks and downdraft extraction. USD 2,000–15,000 FOB Qingdao.

  • CE / ISO 9001
  • 24-month warranty
  • FOB Qingdao
  • Remote & on-site support

P3015 Desk Plasma Cutter: Overview

The P3015 is a desk-type CNC plasma cutter: the cutting table and the motion system are built as one factory-calibrated unit. There is no separate gantry to align on site, the footprint is small, and a downdraft extraction table under the bed keeps fumes away from the operator.

USD 2,000–15,000FOB Qingdao, by configuration
±0.05 mmpositioning accuracy
Integratedfactory-calibrated bed
Downdraftfume extraction table

P3015 Cutting Performance

The P3015 cutting steel plate.

Technical Specifications

P3015 – standard data
Machine typeDesk-type CNC plasma, integrated bed
Positioning accuracy±0.05 mm
DrivePrecision helical racks
Fume extractionDowndraft extraction table
ShippingLargely pre-assembled in a steel-framed crate
PriceUSD 2,000–15,000 FOB Qingdao, depending on configuration
CertificationCE, ISO 9001
Warranty24 months on the whole machine (consumables excluded)
Plasma consumables, LGK plasma source and nesting software
Consumables, LGK plasma power source and nesting software.

Why an Integrated Desk Design

On a conventional gantry machine, rails, table and gantry are aligned on site. On the P3015 the rails are mounted on the machined frame in the factory, so the geometry is set before shipping. Installation comes down to connecting power, compressed air and the ground cable. Cut-edge quality is commonly specified with ISO 9013 (perpendicularity and roughness classes). If your drawings call for a class, tell us and we check it on sample cuts.

Where It Sits in the PCL Plasma Range

MachineBuilt forPrice (FOB Qingdao)
Portable plasma cutterHand or guided cutting, 12–25 mmUSD 1,200
P3015 desk plasma (this machine)Sheet and plate on a compact integrated tableUSD 2,000–15,000
Gantry plasmaLarge plates; plasma and optional flameUSD 2,000–15,000
5-axis bevel plasmaV, X, Y and K weld-prep bevelsUSD 35,000–60,000
Pipe plasmaRound pipe Ø50–1500 mm, saddle cutsOn request
8-axis profile plasmaTubes, channels, H- and I-beams with bevelsUSD 45,000–80,000

P3015 FAQ

How much does the P3015 cost?

USD 2,000–15,000 FOB Qingdao. The price depends mainly on the plasma source and options.

How is it installed?

It ships largely pre-assembled. Connect power, compressed air and ground, then calibrate and start cutting.

How are fumes handled?

By the built-in downdraft table, which pulls fumes down through the bed into the extraction.

How thick can it cut?

That depends on the plasma source in your configuration; tell us your thickest plate and we match the source.

Compare all plasma cutting machines side by side in our selection guide.

Send your plate sizes and thickness. We match the plasma source and quote the P3015.

Get a quote

Global Delivery & Logistics

From our factory to your workshop: secure packing, careful handling and reliable international shipping, followed by installation support and warranty service.

Export packing of a CNC machine
1Export packingEach machine is cleaned, rust-protected, wrapped and fixed in export packaging built for the sea voyage.
CNC machine loaded and secured in a shipping container
2Container loadingMachines are loaded, braced and secured in the container, and checked against the packing list before sealing.
Container ship for international delivery
3Ocean shippingShipped from Qingdao or other Chinese ports on request. Prices are usually quoted FOB Qingdao; shipping documents travel with the cargo.
4Installation & support
  • Installation guidance and operator training
  • On-site installation available on request
  • 24-month warranty on the whole machine
  • Remote technical support by video and phone