H-Beam Cutting Machines
5-axis laser cutting for H-beams and plate on one line: end cuts, copes, notches, bolt holes, ±45° bevels and marking in one pass, for steel-structure fabricators.
- 1 models
- 24 months warranty
- CE ISO 9001
One Line for Beam and Plate Processing
The HF30120 combines a 5-axis laser head with a long bed that takes both H-beams and plate. A steel-structure shop can cut beam connections, base plates and gusset plates on the same machine, from the same programs.
| Parameter | HF30120 |
|---|---|
| H-beam cutting range | 1250 × 600 mm |
| Plate cutting width | 2500 mm |
| Bevel angle (5-axis) | ±45° |
| X/Y positioning and repeat accuracy | ±0.08 mm |
| Rotary axis accuracy | ±0.1° |
| Max positioning speed | 40 m/min |
| Options | Rotary chuck module for round and square tubes |
What It Replaces
Beam fabrication traditionally uses a band saw, a drill line, manual torch work for copes and notches, and a layout crew with tape and chalk. Every handover between those stations adds measuring and the chance of error. The HF line processes the beam in one pass:
- Square and mitre end cuts.
- Copes and flange notches at beam connections.
- Bolt holes in flanges and web.
- Web openings for services.
- Weld-prep bevels up to ±45°.
- Marking of part numbers and layout lines for assembly.
Accuracy on Real Beams
Rolled beams are never perfectly straight or square. The HF controller measures and compensates for beam warping during the cut, and dynamic focus control keeps the laser at the right focal depth as the thickness changes from web to flange. Collision sensors protect the head during 3D moves around the flanges.
Laser or Plasma for Beams?
Laser gives smaller holes, a narrower heat-affected zone and more accurate bolt holes, which matters for bolted connections. For very thick flanges, or when the main need is bevelling heavy sections at lower investment, the 8-axis profile plasma cutter cuts H- and I-beams, channels and tubes with plasma up to 30 mm and a flame torch up to 100 mm.
Questions to Settle Before Ordering
- Largest beam section and length you process, and the heaviest beam weight.
- Import of production files from your detailing software (ask us to test your files).
- In-feed and out-feed conveyors, and whether you need plate cutting on the same line.
- Foundation, power and fume extraction for a long-bed machine.
- Installation, training and on-site commissioning; PCL provides door-to-door logistics, customs support, installation and training.
H-Beam Cutting Machine FAQ
What beam sizes can the HF30120 cut?
H-beams up to 1250 × 600 mm, and plate up to 2500 mm wide on the same bed.
Can it cut bevels for welded connections?
Yes. The 5-axis head cuts bevels up to ±45°, as well as copes, notches and bolt holes.
Can it also cut tubes?
Yes, with the optional rotary chuck module for round and square tubes.
Is a plasma beam line cheaper?
Usually yes, and for thick sections it is often the better tool. Compare with the 8-axis profile plasma cutter.
Send your beam list and a typical connection drawing. We confirm the cutting range and quote the line with conveyors and installation.
Get a quote