LFP3015 Fiber Laser Cutter

Price range: USD 18,000 – 35,000 (depending on configuration · FOB Qingdao)

Open single-table fiber laser for 3000 × 1500 mm sheets, 1–12 kW Raycus/IPG/Max, ±0.03 mm, 100–120 m/min. USD 18,000–35,000 FOB Qingdao.

  • CE / ISO 9001
  • 24-month warranty
  • FOB Qingdao
  • Remote & on-site support

LFP3015: Overview

The LFP3015 is our open single-table laser for 3000 × 1500 mm sheets. Most customers buy it as their first laser: it takes the sheets they already stock, needs no exchange table or enclosure, and can be ordered with anything from a 1 kW to a 12 kW source.

3000 × 1500 mmworking area (10 × 5 ft)
1–12 kWRaycus, IPG or Max
±0.03 mmpositioning accuracy
100–120 m/minmax linkage speed

LFP3015 Cutting Demonstration

The LFP3015 cutting on its open table.

Technical Specifications

LFP3015 – standard data
Working area3000 × 1500 mm
LayoutOpen frame, single table
Laser source1–12 kW; Raycus, IPG or Max
Positioning accuracy±0.03 mm
Max linkage speed100–120 m/min
MaterialsCarbon steel, stainless steel, aluminium, brass
PriceUSD 18,000–35,000 FOB Qingdao, depending on source and options
CertificationCE, ISO 9001
Warranty24 months on the whole machine (consumables excluded)

What the Power Options Cut

Typical maximum thickness from 1 kW to 60 kW; the last column marks the powers this machine can carry. Treat the figures as the ceiling, not the daily working range. Even 1.5 kW reaches about 16 mm carbon steel, so lower powers cover a lot of steel work; the bigger sources mainly add stainless and aluminium thickness and speed.

Typical maximum cutting thickness by laser power, 1 kW to 60 kW
Laser powerCarbon steel (O₂)Stainless (N₂)Aluminium (N₂)Brass (N₂)This model
1 kW10 mm5 mm3 mm3 mm✓
1.5 kW16 mm6 mm4 mm3 mm✓
2 kW20 mm8 mm6 mm5 mm✓
3 kW22 mm10 mm8 mm6 mm✓
4 kW25 mm12 mm10 mm8 mm✓
6 kW25 mm20 mm16 mm12 mm✓
8 kW40 mm30 mm30 mm16 mm✓
12 kW40 mm40 mm40 mm16 mm✓
20 kW80 mm100 mm60 mm20 mm–
60 kW200 mm150 mm–––

Maximum thickness is a ceiling, cut slowly and with a rougher edge. Plan daily production a few millimetres below it, and confirm with the cutting chart of the exact source and head in your quotation.

Typical Cutting Speeds

Carbon steel, oxygen (0.5–0.7 bar, positive focus)
Thickness1.5 kW3 kW6 kW12 kW
2 mm5.03.8–4.2––
3 mm3.63.2–3.63.5–4.2–
4 mm2.53.0–3.23.3–3.8–
6 mm1.42.2–2.52.7–3.2–
8 mm1.21.8–2.22.2–2.5–
10 mm1.01.0–1.32.0–2.32.0–2.3
12 mm0.80.9–1.01.9–2.13.0–3.5
16 mm0.50.6–0.71.2–1.42.8–3.0
20 mm–0.5–0.550.6–0.71.5–1.6
25 mm––0.4–0.50.8–1.0
Stainless steel, nitrogen (10–20 bar, negative focus)
Thickness1.5 kW3 kW6 kW12 kW
1 mm2028–3540–5050–60
2 mm718–2425–3040–45
3 mm4.57–1015–1830–35
5 mm1.53.0–3.67–815–18
6 mm0.82.0–2.76–713–15
8 mm–1.0–1.23.5–3.88–10
10 mm–0.5–0.61.6–2.06.5–7.5
12 mm––1.0–1.25.0–5.5
16 mm––0.5–0.62.0–2.3
20 mm––0.2–0.351.2–1.4

Speeds in m/min. Typical values for good-quality cutting; edge requirements, material grade, gas purity and the head change them. Your quotation includes the chart for the exact configuration.

Living with an Open Table

Everything is within reach: you can watch the head, pull a part halfway through a job, and put a sheet on with a forklift from the side. The price for that is idle time, because the laser waits while the sheet is cleared and reloaded. On one-off and short-run work that hardly matters. Once the machine runs the same parts all shift, the LFP4020 with an exchange table earns more.

An open machine also needs the area around it organized: a guarded zone so that nobody walks through the beam path, and fume extraction connected to the bed.

Where It Sits in the PCL Laser Range

ModelWorking areaPowerBest for
GF30123000 × 1200 mm6–60 kWHigh power on a compact bed
LFP3015 (this machine)3000 × 1500 mm1–12 kWOpen single table; standard sheets
LFP40204000 × 2000 mm1–30 kWDual exchange table for volume
LFH40204000 × 2000 mm1–30 kWHigh-power plate on a plate-welded bed
LFP60206000 × 2000 mm1.5–3 kWLong sheets at lower investment
LFH60206000 × 2000 mm1–12 kWLarge-format production
2-in-1 sheet & tube3015 or 4020 + tubes Ø20–220 mm1–12 kWSheet and tube on one machine

Typical Work

  • Steel and aluminium signage letters.
  • HVAC duct parts and brackets.
  • Electrical enclosures and panels.
  • Furniture frames.
  • Short-run parts for local customers.

Common Problems and How to Fix Them

ProblemUsual causeWhat to do
Dross under stainless or aluminiumSpeed too high, nitrogen pressure too low or focus not deep enoughLower the speed or raise pressure; move the focus down (negative) as thickness grows
Not cutting throughPierce not finished, focus not positive enough on oxygen cuts, dirty protective windowLet all pierce stages finish; raise focus in 1 mm steps; clean or replace the window
Burnt corners and small holesHeat builds up where the head slows downUse corner power ramping; change cut order to spread the heat
Parts tip up and hit the headSmall parts falling between slatsLeave micro-joints; replace worn slats; cut small parts last
Yellow or brown stainless edgeNitrogen below 99.99 % purity, low pressure, stand-off too high or a leakUse at least 99.99 % nitrogen; set stand-off to about 0.5 mm; add 1–2 bar; leak-test fittings

What Decides the Price

ItemOptionsEffect
Laser sourceBrand (Raycus, IPG, Max) and powerThe largest single item; higher power costs more and needs a bigger chiller and supply
Cutting headRaytools or WSX auto-focusAuto-focus and protection against collisions
DriveServo brand, rails and racksAccuracy over the years
TableOpen single tableLowest cost in the range; no exchange table

The LFP3015 is USD 18,000–35,000 FOB Qingdao; the source brand and power make most of the difference.

From Inquiry to Production

  1. Parts and samples. Send a few typical drawings, materials and thicknesses; we cut samples on the power you are considering.
  2. Configuration. We fix the source, head, table and options, and send a layout with floor space, power, gas and extraction connections.
  3. Build and test. The machine is assembled and tested before shipment; lead time is confirmed in the quotation.
  4. Site preparation. Level floor, power supply, assist gas and compressed air, and fume extraction ready before arrival.
  5. Installation and training. Quoted with the machine; operators learn nesting, cutting parameters, daily checks and simple fault finding.
  6. Support. 24-month warranty on the whole machine, consumables excluded.

Before You Order

  • Your sheet size, and whether you also buy 1250 × 2500 mm sheets.
  • Thickness mix by hours per month.
  • Gas: compressed air for thin sheet, nitrogen for stainless, oxygen for thick steel.
  • Space around the bed for a guarded zone and forklift loading.

Maintenance

WhenWhat
DailyCheck and clean the protective window; check nozzle condition and centring; check gas pressures.
WeeklyRemove slag from the slats; clean dust from rails and racks; check chiller water level.
PeriodicallyReplace worn slats; lubricate rails and racks; change chiller water; change extraction filters.

Safety

An open machine has no housing around the beam, and the light reflected from the sheet is invisible and can injure eyes. Keep the area around the bed fenced off while cutting, give anyone inside it laser safety glasses rated for the wavelength, and keep the extraction running. Slag and dust in the bed can catch fire, especially after cutting aluminium; clean the bed regularly and keep an extinguisher nearby. Oxygen cylinders and lines must be kept free of oil and grease.

Strengths and Limits

Strengths

  • Takes standard 1500 × 3000 mm sheets
  • Lowest investment in the range
  • Open access for loading and inspection

Limits to know

  • Laser waits during loading
  • Needs a guarded area
  • Not built for long unattended runs

LFP3015 FAQ

What sheet size does the LFP3015 take?

Sheets up to 3000 × 1500 mm, the standard 10 × 5 ft format.

How much does the LFP3015 cost?

USD 18,000–35,000 FOB Qingdao. The source brand and power make most of the difference.

Which power should I choose?

Choose by the thickness you cut most hours, not the thickest plate you might see once a year. Then check that thickness against the chart of the quoted source.

Is the LFP3015 enclosed?

No, it is open. For an exchange table and higher output, see the LFP4020.

What gas do I need for the LFP3015?

Compressed air covers thin carbon and stainless sheet cheaply; nitrogen gives bright stainless edges; oxygen is used for thicker carbon steel.

Can I upgrade the power later?

The source is a major component; plan the power you need at purchase. Ask us before ordering if you expect to move to thicker plate.

Compare all fiber laser cutting machines side by side in our selection guide.

Send your sheet sizes and thickness mix. We suggest a source and quote the LFP3015 with every component brand named.

Get a quote

Laser Cutting Samples

Fiber laser cutting samples in mild steel and stainless steel
Sample parts in mild steel and stainless steel. The thickness you can cut depends on the laser source power; send your drawing for samples on your material.

Machine Structure: Gantry or Desk Type

Fiber laser cutters are built in two basic ways. The structure decides how well the machine keeps its accuracy at high acceleration and under the heat of long cutting runs.

Gantry structure with separate rails

Gantry structure (PCL standard)

  • Rails apart from the cutting table: heat from the cutting zone goes into the table, not into the frame that carries the rails.
  • Dual drive: both sides of the gantry are driven, so it stays square at high acceleration.
  • Open sides: sheets can be loaded by forklift or crane from the side.
  • Service: worn table slats and parts are replaced without touching the rails.
Integrated welded desk-type bed

Integrated desk structure

  • One welded body: table and rails sit on the same frame, which is compact and costs less.
  • Heat: cutting heat goes into the same frame that carries the rails, which matters more at high power and on long runs.
  • Loading: closed sides make loading large, heavy sheets slower.
  • Best for: lower power, smaller sheets and limited budgets.

At high power and high acceleration, the gantry structure keeps the precision parts away from the heat of cutting. That is why PCL builds its fiber laser cutters this way.

Machine Bed: Plate-Welded or Tube-Welded

The bed carries the gantry and takes every acceleration of the cutting head. How it is built decides how long the machine keeps its accuracy, especially above 3 kW and on heavy plate.

PCL plate-welded machine bed

Plate-welded bed (PCL standard)

  • Thick steel plate: welded from 12–16 mm carbon steel plate; the mass damps vibration at high acceleration.
  • Stress relief: annealed at about 600 °C and cooled slowly in the furnace, so welding stresses do not distort the bed later.
  • Machined in one set-up: all mounting faces for rails and racks are milled on a large gantry milling machine in a single clamping, so they stay parallel.
Tube-welded machine bed

Tube-welded bed (economy design)

  • Hollow square tube: lighter and cheaper, but more prone to vibration at high acceleration.
  • Thinner walls: more sensitive to heat and to the forces of heavy plate and fast moves.
  • Best for: low power and thin sheet, where loads are small.

When comparing quotations, ask how the bed is built, whether and how it is stress-relieved, and how the mounting faces are machined. These answers say more about long-term accuracy than the accuracy figure on the data sheet.

Global Delivery & Logistics

From our factory to your workshop: secure packing, careful handling and reliable international shipping, followed by installation support and warranty service.

Export packing of a CNC machine
1Export packingEach machine is cleaned, rust-protected, wrapped and fixed in export packaging built for the sea voyage.
CNC machine loaded and secured in a shipping container
2Container loadingMachines are loaded, braced and secured in the container, and checked against the packing list before sealing.
Container ship for international delivery
3Ocean shippingShipped from Qingdao or other Chinese ports on request. Prices are usually quoted FOB Qingdao; shipping documents travel with the cargo.
4Installation & support
  • Installation guidance and operator training
  • On-site installation available on request
  • 24-month warranty on the whole machine
  • Remote technical support by video and phone