LT240S tube laser cutting machine

Price on request Get a Quote →

Side-mounted fiber tube laser for round and square tubes 20–240 mm and single tubes up to 200 kg, 1.5–6 kW, dual pneumatic chucks for short tailings, ±0.03 mm.

  • CE / ISO 9001
  • 24-month warranty
  • FOB Qingdao
  • Remote & on-site support

LT240S: Overview

The LT240S takes the 20–240 mm range of the LT240 and builds it for heavy tube: a side-mounted bed for forklift loading, dual full-stroke pneumatic chucks for single tubes up to 200 kg, and the ability to cut between the chucks so the tailing stays short.

Ø/□20–240 mmround and square tubes
1.5–6 kWfiber laser
200 kgmax single tube
±0.03 mmpositioning accuracy

Technical Specifications

LT240S – standard data
Tube sizeRound Ø20–240 mm, square 20–240 mm
Laser source1.5–6 kW fiber
ClampingPneumatic full-stroke dual chucks
Positioning accuracy±0.03 mm
Max single tube weight200 kg
Bed layoutSide-mounted, open-side loading
DriveHiwin linear guides, YYC racks
CertificationCE, ISO 9001
Warranty24 months on the whole machine (consumables excluded)

Tailings: the Cost You See at the End of Every Tube

A conventional tube laser cannot cut where the rear chuck holds the tube, so every tube ends in a piece that goes to scrap. With dual chucks the head can work between them and the tube is handed from one chuck to the other, which shortens the unusable end considerably.

To see what it is worth, multiply the tailing you save per tube by the number of tubes a year and the price per metre. On stainless steel and brass the figure is usually large enough to decide between two offers. Ask every supplier for the tailing length on your own tube sizes, measured, not estimated.

Loading 200 kg Tubes

Threading a heavy tube in from the end of the machine takes time and needs care. On the LT240S the forklift sets it from the side, directly at the chuck centre. The chucks then clamp it with full-stroke pneumatic force so it does not slip when it accelerates in rotation. Slag and sparks fall to the floor, away from the Hiwin guides and YYC racks.

Choose by Your Main Sizes

Size the machine to the tubes that make up most of your work, roughly the 80 % of volume, and check that the largest tubes still fit. A machine sized for the occasional largest tube costs more and is slower on the everyday ones.

Two, Three or Four Chucks

The number of chucks decides how much of each tube ends up as scrap and what the machine costs. More chucks shorten the tailing but make the machine longer, add servo axes and raise the price. The LT240S sits in the second row of this table:

LayoutGainPrice paidFits
Two chucksCompact, lower price, simple to installTailing at the end of each tubeThin and medium tubes, mostly under 1 t, high speed
Two chucks with hand-overHead can cut between the chucksMore chuck mechanicsShorter tailings on medium and heavy tube
Three chucksMiddle chuck moves out of the way; tailing close to zeroLonger machine, more servo axes, higher priceMixed steel-structure work with heavy tube
Four chucksBevels at both ends of a part; very long, heavy tubesHighest cost and floor spaceShipbuilding, offshore, energy equipment

What a Tailing Costs

A conventional two-chuck machine typically leaves 100–300 mm at the end of each tube. On a 6 m tube that is about 1.7–5 % of the material. Multiply that by your yearly tube tonnage and price per tonne, and compare it with the price difference between machines. Ask whether the tailing figure a supplier gives you was measured in production or under ideal conditions; tube tolerances and part layout mean it is never exactly zero.

Common Problems and How to Fix Them

ProblemUsual causeWhat to do
Long tailings on expensive tubeRear chuck holds the end of the tubeUse dual-chuck hand-over and nest the last part close to the end
Heavy tube slips at speedClamping force low or worn jawsCheck air pressure and jaws; reduce rotation acceleration
Holes drift on long heavy tubesTube sag or bow between supportsRun edge-finding; check the tube supports
Spatter inside the tubeBeam exits and hits the opposite wallAdjust break-through parameters; plan the cut order
Dirty guides and racksDebris from loading or cuttingClean weekly; the side-mounted bed keeps most slag away

What Decides the Price

ItemOptionsEffect on price and use
Laser power1.5–6 kWHigher power for thick walls and speed
ChucksDual full-stroke pneumaticShort tailings and secure clamping of 200 kg tubes
LoadingForklift side loading or loading rackRacks pay off at high volume
SoftwareNesting with tailing optimisationMaterial yield on every tube

The LT240S is quoted on request; send your tube list and annual volume.

Where It Sits in the PCL Tube Laser Range

ModelTube sizePowerBest for
MAK100Ø10–100 mm1.5 kWEntry model, small tubes
LT120SØ120 / □120 mm1.5–3 kWSide-mounted, heavy walls up to 10 mm
LT240Ø20–240 mm1.5–6 kWRound, square, rectangular, oval
LT240S (this machine)Ø/□20–240 mm1.5–6 kWSide-mounted, dual chucks, 200 kg tubes
LT360Ø20–360 mm1.5–6 kWLarge diameters, 6 m or 9 m stock

From Inquiry to Production

  1. Tube list and samples. Send your tube sizes, heaviest tube, materials and annual tube consumption, so we can estimate the tailing saving.
  2. Configuration and layout. We fix chuck size, bed length, source and loading, and send a layout drawing with the floor space, power and air connections.
  3. Build and test. The machine is assembled and tested before shipment; lead time is confirmed in the quotation.
  4. Site preparation. A level floor, the power connection, compressed air for the chucks and assist gas, and fume extraction ready before arrival.
  5. Installation and training. Installation and operator training are quoted with the machine; operators learn programming, nesting, daily checks and parameter adjustment.
  6. Support. 24-month warranty on the whole machine, consumables excluded.

Before You Order

  • The tube sizes that make up about 80 % of your volume.
  • Heaviest tube and how it reaches the machine.
  • Annual tube consumption and price per metre, to value shorter tailings.
  • Floor space along the side of the machine for forklift access.

Maintenance

WhenWhat
DailyClean the protective window and nozzle; check both chucks’ jaws; clear slag below the machine.
WeeklyClean guides and racks; drain the air filter; check the tube supports.
PeriodicallyLubricate guides and racks; check chuck air seals and jaw wear; change chiller water.

Safety Around a Tube Laser

Two hazards are specific to tube cutting. The tube rotates, often several metres of it outside the enclosure, so the area along the bed must be kept clear while the chucks turn. And the beam leaves the far side of the tube when it cuts through, so the cutting zone has to stay enclosed or shielded. Keep the interlocks on the doors and light curtains working, wear laser safety glasses rated for the laser wavelength where the cutting area is open, and connect the extraction before cutting coated or galvanized tube.

Strengths and Limits

Strengths

  • Short tailings with dual chucks
  • Forklift side loading of tubes up to 200 kg
  • Slag falls clear of guides and racks

Limits to know

  • Round and square tube; send other profiles for checking
  • Above 240 mm see the LT360
  • More chuck mechanics to maintain than a single-chuck machine

LT240S FAQ

How heavy can a tube be on the LT240S?

Up to 200 kg for a single tube.

What tube sizes does it cut?

Round Ø20–240 mm and square 20–240 mm.

How much tailing does it save?

It depends on the tube and the parts; send your sizes and we measure it on a sample.

Why side-mounted?

Forklift loading at the chuck centre, cleaner guides and a smaller footprint.

Which power should I choose?

Thin stainless favours speed and good loading; thick carbon steel favours higher power and strong clamping. Send your mix.

Can you cut samples?

Yes. Send the drawing, tube size and material.

Is zero tailing really zero?

No machine leaves exactly nothing; tube tolerances and the part layout always leave a short piece. Ask for the tailing measured on your tubes in production.

Do I need three or four chucks?

Only for heavy tube in large volumes, or parts with bevels at both ends. For most 20–240 mm work, two chucks with hand-over are the better value.

Compare all tube laser cutting machines side by side in our selection guide.

Send your heaviest tube and annual consumption. We quote the LT240S with the tailing length on your tubes.

Get a quote

Global Delivery & Logistics

From our factory to your workshop: secure packing, careful handling and reliable international shipping, followed by installation support and warranty service.

Export packing of a CNC machine
1Export packingEach machine is cleaned, rust-protected, wrapped and fixed in export packaging built for the sea voyage.
CNC machine loaded and secured in a shipping container
2Container loadingMachines are loaded, braced and secured in the container, and checked against the packing list before sealing.
Container ship for international delivery
3Ocean shippingShipped from Qingdao or other Chinese ports on request. Prices are usually quoted FOB Qingdao; shipping documents travel with the cargo.
4Installation & support
  • Installation guidance and operator training
  • On-site installation available on request
  • 24-month warranty on the whole machine
  • Remote technical support by video and phone