LFH4020: Overview
The LFH4020 is a 4000 × 2000 mm laser for heavy plate. Its bed is plate-welded and heat-treated before machining, and it takes sources from 1 kW to 30 kW. Typical users cut ship parts, base plates and machinery components.

Technical Specifications
| Model | LFH-4020 |
|---|---|
| Working area | 4000 × 2000 mm |
| Laser power | 1–30 kW; IPG, Raycus or MAX |
| Max acceleration | 1.2–1.5 G |
| Bed | Plate-welded, heat-treated and stress-relieved |
| Cutting head | Raytools auto-focus |
| Certification | CE, ISO 9001 |
| Warranty | 24 months on the whole machine (consumables excluded) |
Why Heavy Plate Needs a Relieved Bed
A welded frame holds stresses from welding. If it is machined without relieving them, it keeps moving slowly for months, and the machine loses accuracy. Heavy plate adds load and heat on top. Heat treatment before machining removes those stresses, so the bed keeps its geometry under daily heavy cutting.
What the Power Options Cut
Typical maximum thickness from 1 kW to 60 kW; the last column marks the powers this machine can carry. Treat the figures as the ceiling, not the daily working range. Carbon steel gains little thickness between 3 and 6 kW (22 to 25 mm); stainless doubles from 10 to 20 mm. For 20–30 kW, ask for the chart of the source you are quoted.
| Laser power | Carbon steel (O₂) | Stainless (N₂) | Aluminium (N₂) | Brass (N₂) | This model |
|---|---|---|---|---|---|
| 1 kW | 10 mm | 5 mm | 3 mm | 3 mm | ✓ |
| 1.5 kW | 16 mm | 6 mm | 4 mm | 3 mm | ✓ |
| 2 kW | 20 mm | 8 mm | 6 mm | 5 mm | ✓ |
| 3 kW | 22 mm | 10 mm | 8 mm | 6 mm | ✓ |
| 4 kW | 25 mm | 12 mm | 10 mm | 8 mm | ✓ |
| 6 kW | 25 mm | 20 mm | 16 mm | 12 mm | ✓ |
| 8 kW | 40 mm | 30 mm | 30 mm | 16 mm | ✓ |
| 12 kW | 40 mm | 40 mm | 40 mm | 16 mm | ✓ |
| 20 kW | 80 mm | 100 mm | 60 mm | 20 mm | ✓ |
| 60 kW | 200 mm | 150 mm | – | – | – |
Maximum thickness is a ceiling, cut slowly and with a rougher edge. Plan daily production a few millimetres below it, and confirm with the cutting chart of the exact source and head in your quotation.
Typical Cutting Speeds
| Thickness | 1.5 kW | 3 kW | 6 kW | 12 kW |
|---|---|---|---|---|
| 2 mm | 5.0 | 3.8–4.2 | – | – |
| 3 mm | 3.6 | 3.2–3.6 | 3.5–4.2 | – |
| 4 mm | 2.5 | 3.0–3.2 | 3.3–3.8 | – |
| 6 mm | 1.4 | 2.2–2.5 | 2.7–3.2 | – |
| 8 mm | 1.2 | 1.8–2.2 | 2.2–2.5 | – |
| 10 mm | 1.0 | 1.0–1.3 | 2.0–2.3 | 2.0–2.3 |
| 12 mm | 0.8 | 0.9–1.0 | 1.9–2.1 | 3.0–3.5 |
| 16 mm | 0.5 | 0.6–0.7 | 1.2–1.4 | 2.8–3.0 |
| 20 mm | – | 0.5–0.55 | 0.6–0.7 | 1.5–1.6 |
| 25 mm | – | – | 0.4–0.5 | 0.8–1.0 |
| Thickness | 1.5 kW | 3 kW | 6 kW | 12 kW |
|---|---|---|---|---|
| 1 mm | 20 | 28–35 | 40–50 | 50–60 |
| 2 mm | 7 | 18–24 | 25–30 | 40–45 |
| 3 mm | 4.5 | 7–10 | 15–18 | 30–35 |
| 5 mm | 1.5 | 3.0–3.6 | 7–8 | 15–18 |
| 6 mm | 0.8 | 2.0–2.7 | 6–7 | 13–15 |
| 8 mm | – | 1.0–1.2 | 3.5–3.8 | 8–10 |
| 10 mm | – | 0.5–0.6 | 1.6–2.0 | 6.5–7.5 |
| 12 mm | – | – | 1.0–1.2 | 5.0–5.5 |
| 16 mm | – | – | 0.5–0.6 | 2.0–2.3 |
| 20 mm | – | – | 0.2–0.35 | 1.2–1.4 |
Speeds in m/min. Typical values for good-quality cutting; edge requirements, material grade, gas purity and the head change them. Your quotation includes the chart for the exact configuration.
LFH4020 or LFP4020
Same bed size, same power range. The LFP4020 adds the exchange table and suits many sheets per shift. The LFH4020 suits plate-heavy work where each sheet stays on the bed a long time and table exchange matters less. Send your mix and we quote both side by side.
Where It Sits in the PCL Laser Range
| Model | Working area | Power | Best for |
|---|---|---|---|
| GF3012 | 3000 × 1200 mm | 6–60 kW | High power on a compact bed |
| LFP3015 | 3000 × 1500 mm | 1–12 kW | Open single table; standard sheets |
| LFP4020 | 4000 × 2000 mm | 1–30 kW | Dual exchange table for volume |
| LFH4020 (this machine) | 4000 × 2000 mm | 1–30 kW | High-power plate on a plate-welded bed |
| LFP6020 | 6000 × 2000 mm | 1.5–3 kW | Long sheets at lower investment |
| LFH6020 | 6000 × 2000 mm | 1–12 kW | Large-format production |
| 2-in-1 sheet & tube | 3015 or 4020 + tubes Ø20–220 mm | 1–12 kW | Sheet and tube on one machine |
Common Problems and How to Fix Them
| Problem | Usual cause | What to do |
|---|---|---|
| Pierce blow-out on thick plate | Single-step pierce on heavy plate | Use staged piercing and let the plate cool between pierces |
| Heavy dross under thick carbon steel | Speed too high, oxygen pressure low, focus too negative, nozzle partly blocked | Reduce speed by 5–8 %; keep oxygen at 0.5–0.7 bar; set focus +3 to +4 mm; check the nozzle |
| Not cutting through | Pierce not finished, focus not positive enough on oxygen cuts, dirty protective window | Let all pierce stages finish; raise focus in 1 mm steps; clean or replace the window |
| Dimensions drift over a long sheet | Dirt on racks or rails, or thermal growth of the plate | Clean rails and racks; cut in an order that spreads the heat |
What Decides the Price
| Item | Options | Effect |
|---|---|---|
| Laser source | Brand (Raycus, IPG, Max) and power | The largest single item; higher power costs more and needs a bigger chiller and supply |
| Cutting head | Raytools or WSX auto-focus | Auto-focus and protection against collisions |
| Drive | Servo brand, rails and racks | Accuracy over the years |
| Bed | Plate-welded, heat-treated | Built for heavy plate and long service |
| Power | 1–30 kW | Heavy plate needs higher power and a matching gas supply |
The LFH4020 is quoted on request.
From Inquiry to Production
- Parts and samples. Send your heaviest plate and a typical part; we cut a sample on the power you are considering.
- Configuration. We fix the source, head, table and options, and send a layout with floor space, power, gas and extraction connections.
- Build and test. The machine is assembled and tested before shipment; lead time is confirmed in the quotation.
- Site preparation. Level floor, power supply, assist gas and compressed air, and fume extraction ready before arrival.
- Installation and training. Quoted with the machine; operators learn nesting, cutting parameters, daily checks and simple fault finding.
- Support. 24-month warranty on the whole machine, consumables excluded.
Before You Order
- Heaviest plate and the thickness you cut most hours.
- Crane capacity for loading heavy sheets.
- Oxygen supply for thick carbon steel.
- Floor load and foundation for a heavy machine.
Maintenance
| When | What |
|---|---|
| Daily | Check and clean the protective window; check nozzle condition and centring; check gas pressures. |
| Weekly | Remove slag; clean rails and racks; check the height sensor. |
| Periodically | Replace slats; lubricate rails and racks; change chiller water and filters. |
Safety
Laser light reflected from the sheet is invisible and can injure eyes, so the cutting area must be enclosed or fenced off and the door interlocks must stay working. Keep the extraction running and its filters clean; dust in the bed and filters can catch fire, especially after aluminium. Keep oxygen equipment free of oil and grease, and secure gas cylinders.
Strengths and Limits
Strengths
- Heat-treated bed for heavy plate
- 1–30 kW
- High acceleration for a heavy machine
Limits to know
- Single table: loading time counts
- High power needs a large supply
- Heavy plate needs crane loading
LFH4020 FAQ
What power range is available?
1 kW to 30 kW from IPG, Raycus or MAX.
What makes the LFH bed different?
It is plate-welded and heat-treated to relieve welding stresses, which keeps it accurate under heavy plate.
How thick can it cut?
It depends on the source. Typical maximums are 25 mm carbon steel and 20 mm stainless at 6 kW, and about 40 mm of both at 12 kW. Ask for the chart of your quoted source.
Can I see cuts on my material?
Yes. Send your thickest typical part for a sample cut.
Do I need a special foundation?
Heavy machines and heavy plate need a level, solid floor; we send the floor requirements with the layout.
Which gas for thick carbon steel?
Oxygen, at low pressure; the material library gives the values for each thickness.
Compare all fiber laser cutting machines side by side in our selection guide.
Send your heaviest plate and daily mix. We suggest a source and quote the LFH4020.
Get a quote










