portable plasma air cutting machine

$1,200.00

Inverter air plasma cutter, 12–25 mm quality cutting, AC 220/380 V, 60% duty cycle, handheld or on a CNC table. USD 1,200 FOB Qingdao.

  • CE / ISO 9001
  • 24-month warranty
  • FOB Qingdao
  • Remote & on-site support

Portable Plasma Air Cutter: Overview

The PCL portable plasma cutter is an inverter air-plasma unit for on-site and workshop cutting. It cuts carbon steel and stainless steel with quality cuts from 12 to 25 mm, runs on 220 V or 380 V, and can be used by hand or mounted on a CNC table.

USD 1,200FOB Qingdao
12–25 mmquality cutting capacity
220 / 380 VAC input ±15%
60%duty cycle at max output

Plasma Source on a Gantry

The plasma source integrated with a CNC gantry.

Technical Specifications

Portable plasma – standard data
Power inputAC 220 V / 380 V ±15%
Quality cutting capacity12–25 mm
Duty cycle60% at max output
TechnologyInverter air plasma
MaterialsCarbon steel, stainless steel and other conductive metals
UseHandheld or mounted on a CNC table
PriceUSD 1,200 FOB Qingdao
CertificationCE, ISO 9001

What the Duty Cycle Means

A 60% duty cycle means that at maximum output the unit can cut for 6 minutes in every 10 before it needs to cool. At lower current the allowed cutting time is longer. For continuous production cutting on a table, plan for this or choose a larger source.

Where It Sits in the PCL Plasma Range

MachineBuilt forPrice (FOB Qingdao)
Portable plasma cutter (this machine)Hand or guided cutting, 12–25 mmUSD 1,200
P3015 desk plasmaSheet and plate on a compact integrated tableUSD 2,000–15,000
Gantry plasmaLarge plates; plasma and optional flameUSD 2,000–15,000
5-axis bevel plasmaV, X, Y and K weld-prep bevelsUSD 35,000–60,000
Pipe plasmaRound pipe Ø50–1500 mm, saddle cutsOn request
8-axis profile plasmaTubes, channels, H- and I-beams with bevelsUSD 45,000–80,000

Portable Plasma FAQ

How thick can the portable plasma cut?

Quality cuts from 12 to 25 mm, depending on the material.

What power supply does it need?

AC 220 V or 380 V, ±15%.

Can it be used on a CNC table?

Yes. It can be used by hand or mounted on a CNC gantry.

How much does it cost?

USD 1,200 FOB Qingdao.

Compare all plasma cutting machines side by side in our selection guide.

Ask for availability. We confirm voltage, accessories and freight to your port.

Get a quote

Global Delivery & Logistics

From our factory to your workshop: secure packing, careful handling and reliable international shipping, followed by installation support and warranty service.

Export packing of a CNC machine
1Export packingEach machine is cleaned, rust-protected, wrapped and fixed in export packaging built for the sea voyage.
CNC machine loaded and secured in a shipping container
2Container loadingMachines are loaded, braced and secured in the container, and checked against the packing list before sealing.
Container ship for international delivery
3Ocean shippingShipped from Qingdao or other Chinese ports on request. Prices are usually quoted FOB Qingdao; shipping documents travel with the cargo.
4Installation & support
  • Installation guidance and operator training
  • On-site installation available on request
  • 24-month warranty on the whole machine
  • Remote technical support by video and phone