Tank Fillet Welding Machine: Overview
The tank fillet welding carriage holds the welding torch and travels along the seam on permanent magnets. It welds continuous or stitch fillet welds on tanks, bulkheads and long plates at a constant speed, so a welder supervises several metres of seam instead of welding it by hand.
Technical Specifications
| Applicable diameter | 1000 mm and up (flat plate also) |
|---|---|
| Welding speed | 100–1500 mm/min, stepless |
| Torch adjustment | 50 mm vertical and horizontal |
| Welding modes | Continuous or stitch (intermittent) |
| Input voltage | AC 110 V / 220 V, 50/60 Hz |
| Carriage weight | 15 kg |
| Price | USD 900 FOB Qingdao |
How It Works
- Permanent magnets and a guide unit hold the carriage on the plate and keep it on the seam line.
- The magnet handle adjusts the holding force.
- Speed, stitch length and end position are set and shown on the digital display.
- Limit switches at both ends stop the carriage; it welds in both directions.
- Between stitches it travels at full speed to save time.
Typical Work
- Storage tanks.
- Ship bulkheads and stiffeners.
- Long fillet welds on plates and girders.
- Steel flanges and construction steel.
For automated welding of large structures with seam tracking, see our welding robots.
Tank Fillet Welder FAQ
What tanks can it weld?
Tanks from 1000 mm diameter upwards, and flat plates.
Can it weld stitch welds?
Yes. It welds continuous or stitch fillet welds, with the stitch length set on the display.
Which welding machine do I need?
The carriage carries and moves the torch of your welding power source; a wire-feed (MIG/MAG) source is typical. Tell us your torch type and we confirm the clamp.
How much does it cost?
USD 900 FOB Qingdao.
Compare all machines on offer side by side in our selection guide.
Ask for availability. We confirm voltage and freight to your port.
Get a quote










